Real-time Service Area
for Kansas City, MO
Our Top Cities
.
After Hours Call D at 4:30 A at 4:50 Left site 5:44 Home at 6:00 )**(&)&(*)*)*(**)*))**((*)*)**))*(&))*(*)*((&(&( The two 80% nat gas furnaces that are twinned serve the common area and offices. When I arrived they were both out locked out of service on internal safeties. The filters were removed and they were packed. The furnaces were restarted and observed. They both finished their ignition sequence and the burners lit. The amp draws on the motors were checked then the temperatures on the return and supply sides. The return temperature was elevated at 81deg. This elevated return temp plus the clogged filters would cause the symptoms seen today. The truck bay thermostats for the unit heaters were set back to the setpoints that someone had marked at (55deg). This will cool the return air to keep the furnaces from overheating. In addition to this I spoke with Shane and he advised leaving the filters out until Monday when he will change them. At this time the furna
Johann A.
Went for a tune up call today for heat. Tested for static pressure system is at max when in heat. All electrical components are passing for manufacture specifications. Did a combustion test is within range. Inspected heat exchanger no cracks/leaks were detected. Checked temp split and is passing for specifications. Cleaned flame sensor and pressure switch hose. Did notice blower wheel dust have a lot of dust built up, recommend a cleaning. As well water panel for humidifier needs to be replaced. Customer approved of replacing water panel.System is up and running before departure. Thank you for choosing LBA services-Johann
Patrick K.
Arrived to do a performance maintenance. Set up for combustion analysis temperature split and static pressure tests. Found that the system is operating with excessive static pressure, but is operating well within specifications on the systems temperature rise. Verified operation of all mechanical and electronic components of the furnace. Checked blower for cleanliness and to see if there is any play in the bearings. Found that the fan is starting to collect dust. Checked systems heat exchanger to ensure proper venting of flue gas. Verified operation of the humidifier. Humidifiers solenoid valve is not allowing water to flow. Furnace is operational at this time. Will reach out in the new year to schedule humidifier replacement.
Calvin W.
Inducer motor part warranty, single furnace tuneup
Patrick K.
Arrived to do a performance maintenance. Set up for combustion analysis temperature split and static pressure tests. Verified operation of all mechanical and electronic components of the furnace. Checked blower for cleanliness and to see if there is any play in the bearings. Found that the fan for heating and cooling is collecting dust debris. Checked systems heat exchanger to ensure proper venting of flue gas. Found hot spots present indicating that the system has overheated at some point. Furnace is operational at this time.
Calvin W.
Dispatched for furnace tune-up. The components that are tested during the tuneup are heat exchanger, flame sensor, igniter, blower wheel, inducer, temp split and combustion in the heat exchanger. All components of the furnace are with in range of manufacture specifications. Thank you for allowing us in your house to provide the perfect home service and for being a member of the perfect family service club from your LBA Lead Service tech Calvin. If I provided a positive or five star experience. I’d appreciate you sharing your thoughts in a review.
Bradley L.
We will be flushing the tankless descaling build up through the tankless. This task is covered once through the membership.
Bradley L.
Test
Johann A.
Went for a maintenance call today for heat. Tested for static pressure system is passing when in heat. All electrical components are passing for manufacture specifications. Did a combustion test is within range. Inspected heat exchanger no cracks/leaks were detected. Checked temp split and is passing for specifications. Did replace filter for customer. Cleaned flame sensor and pressure switch hose. System is up and running before departure. Thank you for choosing LBA services-Johann
Reece M.
Warranty
Patrick K.
Arrived to remedy an inoperable humidifier. Upon inspection of the humidifier, found that the solenoid valve was not receiving signal when the system was running the fan. Performed diagnostic and found that the control board is not relaying the signal to power the humidistat at the proper time. Rectified this wiring error and tested system operations. Humidifier is functioning properly at this time. Spoke with homeowner about the feed line to the humidifier. Saddle valves are known for leaking and for getting clogged. Recommended replacing the saddle valve with a ball valve. With homeowners approval installed the new ball valve and made sure that there are no leaks. System is functioning properly at this time.
Lane H.
…
Bradley L.
Inspection
Andrew S.
Arrived for furnace check today. Static is passing. Heat exchanger looks good. Carbon monoxide test was 0ppm. All electrical is in range. I changed furnace filter. I noticed humidifier was in bad shape. Today you purchased a new bypass humidifier. We will back to our install on December 23. Thanks for choosing LBA. Happy Holidays!
Calvin W.
Dispatched for furnace tune-up. The components that are tested during the tuneup are heat exchanger, flame sensor, igniter, blower wheel, inducer, temp split and combustion in the heat exchanger. All components of the furnace are with in range of manufacture specifications. Thank you for allowing us in your house to provide the perfect home service and for being a member of the perfect family service club from your LBA Lead Service tech Calvin. If I provided a positive or five star experience. I’d appreciate you sharing your thoughts in a review.