Real-time Service Area
for Platte City, MO
Our Top Cities
Westin S.
Quote
Westin S.
Completed ac inspection all components tested to manufacture specifications. I recommended that they get a duct cleaning
Camron K.
Reviewed options. Customer chose to have spot repair done. Scheduled for Wednesday per customer's request.
Cameron W.
Sold job
Westin S.
Gave quote for a humidifier
TYLER M.
Change of job
.
****(*(*((*(*((**(*(*((*((* Rick, Left shop at 9ish, completed at 1:30. The arrival didn’t go through due to internet, didn’t discover until the job was completed. This communication wire (14/4) cannot be spliced. Only sold in 50’ or 250’. Cd jones had the 250’ for $275. I used 90’ sourced from the shop. The job went well and is completed. *)*(&)*(&&&)&()&(&(&)&&(&((**((**** Today the parts for this repair were picked up and brought onto the site. The 208v 1ph communication wire from the South evaporator head to the outside condenser was replaced and the system was function checked. The system returned to normal function after the repair was made. Thank you, Jon Tech notes: Gree, m/m multi124hp230v1co, s/n 2618GS111717. Both evap heads cooling. This is a time plus material estimate for the replacement of the 208v mini-split wire that was damaged by a squirrel. This wire supplies power to the south head unit for the mini-split system that serves the sorting room. T
.
I met with David and he showed me the wire that the squirrel ate through. This wire is not intended to be spliced and measurements were taken to replace the wire. The line-set enters the building through a metal wall that is very sharp. An estimate for the replacement of the damaged wire as well as adding protection to both high voltage wires that enter the building was created and emailed to David. While on-site today I located the unlabeled breaker that serves the A/C system and turned it off. In addition to this the damaged wire was removed from the outside unit and rendered safe just in case someone turns the breaker on. Thank you, Jon
Robby M.
Completed AC inspection for customer. All aspects tested within manufacturer specifications. No recommendations at this time. Thank you!
.
Completed a site survey and the site survey check sheet. It has been emailed. Thank you, Jon
Scott M.
Na
Scott M.
Na
Scott M.
Na
Scott M.
Na
Robby M.
Completed furnace inspection for customer. All aspects of system tested within manufacturer specifications. Furnace does show signs of its age but is testing good. No recommendations at this time.