Real-time Service Area
for Prairie Village, KS
Our Top Cities
Andrew S.
Arrived for furnace check today. Static is running over the max. Heat exchanger looks ok. Carbon monoxide test was 0ppm. All electrical is in range. Filter is good. There is a good temperature rise. System is running at departure. Thanks for choosing LBA. Happy Holidays!
Calvin W.
Dispatched for heat pump not coming on. After a thorough diagnostic of the whole system it was found to be a fault during the transition of the operation. This includes from heat to cool, cool to heat, or heat pump to back up heat. This is cause due to the way the system was designed and installed. In order to remedy the system it would require an extensive rewire and new interface. Will follow up on Wednesday Dec 17 Thank you for allowing us in your house to provide the perfect home service and for being a member of the perfect family service club from your LBA Lead Service tech Calvin. If I provided a positive or five star experience. I’d appreciate you sharing your thoughts in a review.
Fabian C.
Customer called in about a leak coming from either the humidifier or water heater. Upon arrival, customer let me know, water leak has dried up, but it was present the day before. Upon further inspection discovered that the leak was coming from the T&P valve of the water heater. Checked water pressure to the house and water pressure was sitting at 90 psi. Expansion tank bladder bursted and it’s now full of water and not doing its job. Informed customer due to the high water pressure from the city and the expansion tank bladder bursting inside is causing the T&P valve from the water heater to leak due to high pressure build up when water heater is heating. Gave customer different options and customer decided to go with the first option which is replaced PRV, expansion tank and T&P valve. Started by drain down the house down repiping the main entrance area and install a new ball valve and PRV. Set pressure to 75 psi. Went ahead and also replace the expansion tank and T&P valve to the wate
Chase P.
Completed furnace, maintenance and inspection on both systems. I checked temp splits, and air filter. I checked amp draws and components. I cleaned flame sensor and wiped down units. Both systems are operating within manufacturer specifications at departure.
Andrew S.
Arrived to fix humidifier not working. Found that the power for the humidifier was not wired properly. Rewired it and humidifier is working. Water is flowing and water panel is good. Happy Holidays!
Johann A.
Went for a maintenance call today for heat. All electrical components are passing for manufacture specifications. Did a combustion test is within range. Inspected heat exchanger no cracks/leaks were detected. Checked temp split and is passing. Did replace filter for customer. Cleaned flame sensor and pressure switch hose. System is up and running before departure. Thank you for choosing LBA services-Johann
Bradley L.
Cleaning out both showers from the debris that’s in the p trap getting caught
Joe K.
Performed 3 maintenance on furnaces. Tested all safeties. All were good. All amp draws of motors were good. Blower wheels were clean. Heat exchangers were good. and drains and exhaust were clear. Units are operating properly at this time.
Bradley L.
Sewer inspection
Reece M.
Duct clean
Calvin W.
Dispatched for furnace tune-up. The components that are tested during the tuneup are heat exchanger, flame sensor, igniter, blower wheel, inducer, temp split and combustion in the heat exchanger. All components of the furnace are with in range of manufacture specifications. Thank you for allowing us in your house to provide the perfect home service and for being a member of the perfect family service club from your LBA Lead Service tech Calvin. If I provided a positive or five star experience. I’d appreciate you sharing your thoughts in a review.
Chase P.
Completed heating tuneup on main system and mini split. I cleaned both units. I checked camp draws and tested components. I checked airflow and temp splits. Air handler, heat pump, and mini split are operating within manufacture specifications at departure.
Andrew S.
Arrived for furnace check today. Static pressure is running over the max. Heat exchanger looks good. Carbon monoxide test was 0 ppm. Blower wheel is clean. All electrical is running in range. Furnace filter and humidifier pad are good. There is a good temperature rise. System is running at departure. Thanks for choosing LBA.
Lane H.
….
Andrew S.
Arrived for furnace check today. Flue analyzer was reading very high CO readings. I checked heat exchanger and found multiple holes. My field supervisor is out to discuss best solutions. System is red tagged and cannot run heat. Thanks for choosing LBA.