Real-time Service Area
for Stilwell, KS
Our Top Cities
Andrew S.
Arrived for furnace check today. Static pressure is failing. Heat exchanger has some rust forming. Carbon monoxide test was 0ppm. All electrical is good. There is a 55 degree temperature rise. Showed you pics of heat exchanger. System is running at departure. Thanks for choosing LBA. Happy holidays!
Johann A.
Went for a maintenance call today for heat. Tested for static pressure system is passing when in heat. All electrical components are passing for manufacture specifications. Did a combustion test is within range. Inspected heat exchanger no cracks/leaks were detected. Checked temp split and is passing. Did replace filter that was provided from customer. Cleaned flame sensor and pressure switch hose. System is up and running before departure. As well signed up for membership today.Thank you for choosing LBA services-Johann
Steve R.
11/21/25 - Completed a full heating maintenance on four furnaces. The filters were changed and proper operation was tested. All four furnaces were in good condition and they were all running well at this time. All three unit heaters were also running well and in good condition. The two RTU’s on the outside were having issues, the newer unit runs well, but makes a loud noise when it kicks on. The older unit was not heating at this time, the information is all added on the checkout sheets. 11-21-25 steve On site to help Diego with the heating check out the two units listed below have deficiencies that need to be taken care of North East corner Trane 30 Ton Model# YCH360A4LL0B1AB10000000H00000 Serial# C03C02124 Date code 04/03 When we ran the heating system, we were getting flame popping out the inducer plate air vents. There may be some water buildup inside the tubes of the heat exchanger. Causing a venting restriction. The gasket on the outer ring of the inducer motor casing. The
Johann A.
Went for a maintenance call today for heat. Tested for static pressure system is passing when in heat. All electrical components are passing for manufacture specifications. Did a combustion test is within range. Inspected heat exchanger no cracks/leaks were detected. Checked temp split and is passing. Did replace filter for customer. Cleaned flame sensor and pressure switch hose. Did look at water panel for humidifier will recommend to have replaced. Customer approved on water panel to have replaced and did replace before leaving.System is up and running before departure. Thank you for choosing LBA services-Johann
Johann A.
Went for a maintenance call today for heat. Tested for static pressure system is passing when in heat. All electrical components are passing for manufacture specifications. Did a combustion test is within range. Inspected heat exchanger no cracks/leaks were detected. Checked temp split and is passing. Cleaned flame sensor and pressure switch hose. System is up and running before departure. Thank you for choosing LBA services-Johann
Johann A.
Went for a maintenance call today for heat. Tested for static pressure system is passing when in heat. All electrical components are passing for manufacture specifications. Did a combustion test is within range. Inspected heat exchanger no cracks/leaks were detected. Checked temp split and is passing. Did replace filter for customer. Did notice blower wheel is collecting dust and recommend a cleaning.Cleaned flame sensor and pressure switch hose. System is up and running before departure. Thank you for choosing LBA services-Johann
TYLER M.
Quote to replace the heat exchanger in the West Trane package unit serial 154912350L marked as #1. Price includes the factory replacement heat exchanger, shipping and labor. Repairs covered by a one year parts and labor warranty. The existing heat exchanger is rusted through at the seams. The unit has the heat mode disabled for safety until repairs are made.
.
Today two rooftop units and a split system had maintenance and heating checks performed. The filters were changed and the heating functions were checked. The rooftop unit on the west has a heat exchanger that is breached. The gas was turned off to the unit at the roof for safety. Information was gathered for a heat exchanger replacement estimate. All three units checked today passed all heating tests and inspection. Thank you, Jon
Andrew S.
Arrived to replace cover on outdoor unit.
Allin W.
Installed new r/a drop an added two 8x30 r/a’s
Jared B.
Sold discounted ductwork job due to needing to be upsized in the first place and recent install. Plus we’ve already had a blower motor failure. $2675 installing 7/24 paying with check.
JJ H.
Went for a service call today. Blower motor wasn’t coming on. I noticed it had burn marks on the module. After bypassing the board to turn the motor on it still wasn’t coming on. I replaced the motor and system is up and running. Thank you for choosing LBA services!
Johann A.
For this job we did a tankless water heater flush and replaced a check valve inside navien tankless. Hot water back to normal
Tory P.
Tankless water heater needs a new check valve and water heater flush
Johann A.
Capacitor replaced